Mac Media USA, Inc.
cart.cgi Shopping Cart


OEM Roland Printhead WATERBASED DX4 (for Roland, Mimaki, Mutoh)

Untitled Document


Brand New Roland branded Printheads for Mimaki, Roland and Mutoh printers. Although these are for and Aqueous (pigmented & dye) inks, they can be used on Solvent printers if you change the black manifold and gasket (which can be taken from your old print head or purchase a new one). These printheads have the Head Rank numbers that will work with Mimaki, Roland and Mutoh printers. Suitable as-is for Mimaki JV4, GP604d, Roland HiFi Jets, and many other printers or if the manifold is changed can be used on JV3, Roland Versacamms, Soljets and Cammjets.

7 Day Return Policy: You may return unopened printhead packages within 7 days of receiving the package - for a restocking fee of 15%. Returns must be postmarked within 7 days of receiving package. Any opened packages are not eligible for return.

Print heads are intended for installation by factory (Roland, Mimaki or Mutoh) trained and authorized technicians.

Due to the nature of these consumable items and possibility of improper installation, all opened parts sold are non-returnable and final sale. The exception is when a factory authorized technician has personally opened and installed the print head, we allow a 7 day return (with 20% restocking charge). We will require a formal letter from the factory authorized technician to detail their installation procedure. Any damage caused by improper installation will will not be eligible for return.

INVENTORY IN STOCK - 0

Backordered - please email to get delivery information

$759.00


Solvent Resistant Head Cap Manifold-Adapter

Solvent Resistant Head Manifold - Are your nipples broken on your Print Head? Do you have a clogged head? Either of these scenarios will cause missing nozzles or drops of ink onto your print. No need to replace the entire print head. These adapters are made of solvent resistant plastic with an extra fine metal filter inside. Comes with 2 sets of stainless steel screws and nut. Utilize your old gasket when replacing the adapter. **Note, if you are using water based inks, we carry manifolds designed for these types of inks (please inquire)

INVENTORY IN STOCK - 11



Quantity Discounts
QuantityPrice
1+$25.00
3+$19.00


Damper

Dampers for Mimaki, Roland and Mutoh printheads. These are solvent resistant and will also work well with water based inks. It is recommened that you change the dampers and O-rings with every head change. Dirty dampers impede the flow of ink and you'll get frequent drop-outs, missing jets and ink starvation. Eventually, neglected dampers will damage to the printhead because of overheated jets. If you have a problem where the ink constantly gets drained out of the dampers and ink lines back into the cartridge, you have an air leak. Replacing the O-Ring and screw usually cures this problem. Remember that each printhead uses 2 dampers!

INVENTORY IN STOCK - 48



Quantity Discounts
QuantityPrice
1+$10.00
4+$7.00


Wide Filter Damper

Wide Filtered Dampers for Mimaki, Roland and Mutoh printheads. These are solvent resistant and have a wide filter for increased ink flow and longer times between changes. Dirty dampers impede the flow of ink and you'll get frequent drop-outs, missing jets and ink starvation. Eventually, neglected dampers will damage to the printhead because of overheated jets. If you have a problem where the ink constantly gets drained out of the dampers and ink lines back into the cartridge, you have an air leak. Replacing the O-Ring and screw usually cures this problem. Remember that each printhead uses 2 dampers!

INVENTORY IN STOCK - 38



Quantity Discounts
QuantityPrice
1+$11.00
4+$9.00


Oversized Damper with adapter screws

Oversized Dampers for Mimaki, Roland and Mutoh printheads. These are solvent resistant and come with the fitting adapter. If you currently use these dampers, no adjustment is necessary. If you are currently using the standard sized dampers, you will need to remove the damper hold plate in order for these to fit in.

INVENTORY IN STOCK - 41



Quantity Discounts
QuantityPrice
1+$12.00
4+$10.00


Cap Top for DX4 Printhead (For Solvent & Non Solvent)

Solvent Resistant Cap Top for Mimaki, Roland and Mutoh printers. These devices serve 2 purposes - to prevent the printhead from drying out when parked and to assist in priming/sucking out ink from the head. If the rubber around your cap top is bent, brittle or dirty, you will lose suction when the pump is operating - thereby not cleaning your printhead properly. The result is misfiring and printhead clogging. Inspect your Cap Tops often and replace as necessary.

INVENTORY IN STOCK - 45



Quantity Discounts
QuantityPrice
1+$28.00
4+$24.00


Printhead Cable - 21cm (9 in)

These Printhead cables are compatible with Mimaki, Roland and Mutoh printers. They have 21 pins and are 21cm (9 in) length. When head cables get dirty, bent or stripped, you'll get printheads that will misfire or stop working altogether - and then you'll have one expensive repair. You hear this all the time - cables that short out the printhead or worse, cause damage to the expensive Head Board or Carriage Board. If you notice ANY damage (bent connector, dirty leads, even the slightest nick to the cable), change out the cable immediately. It's much cheaper to replace cables than to deal with a broken head board or printhead!

INVENTORY IN STOCK - 39



Quantity Discounts
QuantityPrice
1+$12.00
4+$7.00


Printhead Cable - 35cm (13.75in)

These Printhead cables are compatible with Mimaki, Roland and Mutoh printers. They have 21 pins and are 35cm in length. When head cables get dirty, bent or stripped, you'll get printheads that will misfire or stop working altogether - and then you'll have one expensive repair. You hear this all the time - cables that short out the printhead or worse, cause damage to the expensive Head Board or Carriage Board. If you notice ANY damage (bent connector, dirty leads, even the slightest nick to the cable), change out the cable immediately. It's much cheaper to replace cables than to deal with a broken head board or printhead!

INVENTORY IN STOCK - 27



Quantity Discounts
QuantityPrice
1+$12.00
4+$7.00


Printhead Cable - 40cm (15.75in) - Roland XC

These Printhead cables are compatible with Mimaki, Roland and Mutoh printers - though the length is designed for the Roland XC series printers. They have 21 pins and are 40cm in length. When head cables get dirty, bent or stripped, you'll get printheads that will misfire or stop working altogether - and then you'll have one expensive repair. You hear this all the time - cables that short out the printhead or worse, cause damage to the expensive Head Board or Carriage Board. If you notice ANY damage (bent connector, dirty leads, even the slightest nick to the cable), change out the cable immediately. It's much cheaper to replace cables than to deal with a broken head board or printhead!

INVENTORY IN STOCK - 24



Quantity Discounts
QuantityPrice
1+$12.00
4+$8.00


Wiper

Solvent Resistant Wipers - for Mimaki, Roland and Mutoh printers. When your wipers are dirty and bent, it's time to replace them. Waste Ink and paper dust accumulate on the wipers. If you don't inspect and change them often, you'll get clogged printheads as well as gunk randomly depositing onto your prints. These are low cost items and easy to change. It would be foolish not to perform this needed maintenance at regular intervals.

INVENTORY IN STOCK - 35



Quantity Discounts
QuantityPrice
1+$3.00
6+$2.50


Encoder Sensor for Roland Versacamm (SP, VP, RS)

Encoder Sensor for Roland Versacamm printers (SP, VP, RS)

INVENTORY IN STOCK - 1



$69.00


Encoder Sensor for Roland Soljets, Cammjets

Encoder Sensor for Roland Soljet (SJ, XC, CJ) and HifiJet printers

INVENTORY IN STOCK - 1



$69.00


Encoder Sensor for Mimaki JV3/JV4 Printers

Encoder Sensor for Mimaki JV3 and JV4 printers

INVENTORY IN STOCK - 2



$69.00


Roland Media guides/clamps - for Soljet, HifiJet, CAMMjet

Roland Media guides/clamps

If your old guide is damaged or bent out of shape, time to replace them. Damaged guides may end up causing a printhead crash which may cost you hundreds if not thousands of dollars. This is cheap insurance to keep your media down and against the platen to minimize head crashes from curling media

INVENTORY IN STOCK - 2



$19.00

Due to the nature of these consumable items, all parts sold are non-returnable and final sale