Mac Media USA, Inc.
cart.cgi Shopping Cart


High Quality O-rings for low profile dampers - package of 10

Package of 10 High quality RED o-rings. These are primarily used for the dampers - they go underneath the brass nut. This size is for the low height standard or wide filtered dampers. If you have the oversized tall dampers, look for our other product on this site.

Why are the o-rings important? If they are worn out, compressed or have tiny nicks, they may allow air to leak into the line and you'll notice your ink lines have air bubbles or air gaps in them. This will cause ink starvation or drop outs which is not good for the heads. These are low cost items and cheap enough to for regular maintenance - changing them at every damper change or two.

INVENTORY IN STOCK - 54



$5.00


High Quality O-rings for oversized high profile dampers - package of 10

High quality RED o-rings. These are used only for dampers - they go underneath the brass nut. This size is for the high profile oversized dampers. If you have the standard low profile dampers, look for our other product on this site.

Why are the o-rings important? If they are worn out, compressed or have tiny nicks, they may allow air to leak into the line and you'll notice your ink lines have air bubbles or air gaps in them. This will cause ink starvation or drop outs which is not good for the heads. These are low cost items and cheap enough to for regular maintenance - changing them at every damper change or two.

INVENTORY IN STOCK - 82



$5.00


Solvent Ink Pump

Ink Pump - for Mimaki, Roland and Mutoh printers. If a head (or bank of heads connected to 1 pump) misfires/gets clogged and you rule out a faulty damper, wiper or broken head, you may have a malfunctioning pump. If after several head cleans and the printhead is still the same, check the pump and replace if necessary.

Can be used on both Solvent and Aqueous ink printers

INVENTORY IN STOCK - 8



Quantity Discounts
QuantityPrice
1+$60.00
4+$57.00


Solvent Ink Pump - extra long tubing

Ink Pump - for Mimaki, Roland and Mutoh printers. If a head (or bank of heads connected to 1 pump) misfires/gets clogged and you rule out a faulty damper, wiper or broken head, you may have a malfunctioning pump. If after several head cleans and the printhead is still the same, check the pump and replace if necessary. This pump comes with longer tubing than standard - approximately 6 inches longer on the cap station side.

INVENTORY IN STOCK - 6



Quantity Discounts
QuantityPrice
1+$66.00
3+$63.00


New Style Solvent Pump - for Roland printers only

Solvent Ink Pump - for Roland printers. If a head (or bank of heads connected to 1 pump) misfires/gets clogged and you rule out a faulty damper, wiper or broken head, you may have a malfunctioning pump. If after several head cleans and the printhead is still the same, check the pump and replace if necessary.

Note: These newer style pumps are only for Roland printers that have the bracket to hold them in. If your pump looks VERY different than this, then the only way of using the pump is to purchase the pump conversion kit from Roland.

INVENTORY IN STOCK - 1



$69.00


Encoder Strip for Roland Versacamm, Soljet, Mimaki (JV3/JV4) - printers up to 74" wide

Here is a generic encoder strip that can be used in Roland Soljets & Versacamms, and Mimaki JV3 & JV4 series printers. Will accommodate printers up to 74" wide. The actual strip length is 98"

It's a little more work than using the original encoder strips as you'll need to make a small hole in each end to attach to the screw or spring and cut it down to match the size of the old one. However at less than 1/2 the price, you'll find it a good alternative that works just the same.

INVENTORY IN STOCK - 5



$65.00


Encoder Strip for Mimaki JV3-250sp or printers up to 98" wide

Here is a LONGER generic encoder strip that can be used in Mimaki JV3 & JV4 series printers like the JV3sp-250 (will also fit in Roland printers but cheaper to order our smaller width above). Will accommodate printers up to 98" wide.

It's a little more work than using the original encoder strips as you'll need to make a small hole in each end to attach to the screw or spring and cut it down to match the size of the old one. However at less than 1/2 the price, you'll find it a good alternative that works just the same.

INVENTORY IN STOCK - 1



$89.00


Encoder Strip for Mimaki JV33-160 & CJV30-160

Here is an encoder strip specifically for the Mimaki JV33-160. Correctly sized with the proper hole spacing, this is a plug and play part. No need to put in special holes to make it work.

INVENTORY IN STOCK - 4



$79.00


Solvent Resistant Tubing

Solvent resistant tubing for pumps - This solvent resistant tubing is high quality and holds up to repeated cycles by the peristaltic action of the pump mechanism. Price is PER FOOT in length (i.e. - if you need 6 ft, put in 6 for the quantity). When installing in the pump, be sure that the tubing is inserted so that it doesn't come in contact with the gearing of the pump - or it will be chewed up very quickly. It is recommended to add some lithium grease to the line where it comes in contact with the metal roller will help extend the life of the tubing.

INVENTORY IN STOCK - 37



$3.00


90 Degree Ink Tube connectors

Package of six 90 couplings for flexible ink tubing.

Can be used to join 2 tube ends together.

INVENTORY IN STOCK - 4



$6.00


3 way T connectors for Ink Tubing

Package of six T couplings for flexible ink tubing.

INVENTORY IN STOCK - 8



$6.00


3 way Y connectors for Ink Tubing

Package of six Y couplings for flexible ink tubing.

INVENTORY IN STOCK - 2



$6.00


Syringe - with connectors

Syringe to assist in priming the ink lines. If you are changing print heads, dampers or removing air from the ink lines, using a syringe will greatly help. No need to an ink Pump Up to waste ink. Use the syringe to draw ink up through the lines and after attaching the damper back to the print head, you can do a simple head clean or 2 and the lines will be fully primed. Each syringe comes with solvent tubing, connection tube and junction fittings to aid in priming and cleaning.

INVENTORY IN STOCK - 7



$8.00


Solvent Flush

**NOTE YOU MUST SELECT UPS GROUND or USPS PRIORITY SHIPPING IF YOUR ORDER CONTAINS FLUSH. CAN ONLY BE SENT TO CONTINENTAL USA**

1 liter botttle - Flush-Cleaning solution for Solvent or EcoSolvent inks.

Lyson solution that works very well to dissolve dried ink, clean stuck nozzles, wipe down surfaces contaminated with ink, flushing out lines, cleaning exit lines, etc. This solution is also recommended to keep your exit lines from gumming up over time (which will cause your pump to stop working). Periodically insert (with a syringe or squeeze bottle) some flush through the cap top so that it flows through the pump and out through the waste lines.

INVENTORY IN STOCK - 0

Currently backordered. No ETA on restock

$65.00


Large Head Cleaning Swabs (50 pk)

Medium Head Cleaning Swabs (50) - keep your printheads and capping stations clean on a regular schedule. Price is for a pack of 50. Premium quality foam has good absorbtion. Will not leave fibers or dust behind. Medium sized head is good for tight places but large enough to absorb more dirt and ink

Foam is compatible with both Solvent and Aqueous inks and cleaning solutions.

INVENTORY IN STOCK - 157



Quantity Discounts
QuantityPrice
1+$9.95
4+$8.95


Small Head Cleaning Swabs (100 pk)

Small Head Cleaning Swabs (100) - keep your printheads and capping stations clean on a regular schedule. Price is for a pack of 100. Premium quality foam construction is very durable and used for cleaning around tight areas Will not leave fibers or dust behind. 1/4" head width, 3.8" length

Foam is compatible with both Solvent and Aqueous inks and cleaning solutions.

INVENTORY IN STOCK - 80



$9.95


Small Head Cleaning Swabs - Long handle (100 pk)

Small Head Cleaning Swabs with long handle(100) - keep your printheads and capping stations clean on a regular schedule. Price is for a pack of 100. Premium quality foam construction is very durable and used for cleaning around tight areas Will not leave fibers or dust behind. 1/4" head width, 6.5" length

Foam is compatible with both Solvent and Aqueous inks and cleaning solutions.

INVENTORY IN STOCK - 22



$11.95


Lyson Series 2000 EcoSolvent Ink for Roland Printers

1 liter botttle - Lyson 2000 EcoSolvent Ink
Great Inkset - long lasting colors, very low odor, highly rated USA manufactured ink

For Roland Printers. **AT CHECKOUT, PLEASE INDICATE COLOR(S) DESIRED in the special instructions box

INVENTORY IN STOCK - 0

 0     
Out of Stock
No longer carried

Untitled Document
Cyan
Magenta
Yellow
Black
Light Cyan
Light Magenta

$114.00


Lyson Series 2100 EcoSolvent Ink for Mutoh Printers

1 liter botttle - Lyson 2100 EcoSolvent Ink
Great Inkset - long lasting colors, very low odor, highly rated USA manufactured ink

For Mutoh Printers. **AT CHECKOUT, PLEASE INDICATE COLOR(S) DESIRED in the special instructions box

INVENTORY IN STOCK - 0

Currently backordered. More stock arriving in a couple of days

Untitled Document
Cyan
Magenta
Yellow
Black
Light Cyan
Light Magenta

$114.00


Lyson Series 133 EcoSolvent Ink for Mimaki JV33 Printers

1 liter botttle - Lyson 133 EcoSolvent Ink
Great Inkset - long lasting colors, very low odor, highly rated USA manufactured ink

For Mimaki JV33 Printers. **AT CHECKOUT, PLEASE INDICATE COLOR(S) DESIRED in the special instructions box

INVENTORY IN STOCK - 0

Currently backordered. More stock arriving in a couple of days

Untitled Document
Cyan
Magenta
Yellow
Black
Light Cyan
Light Magenta

$114.00

Due to the nature of these consumable items, all parts sold are non-returnable and final sale