Mac Media USA, Inc.
cart.cgi Shopping Cart


IH47v Printhead for Mimaki JV5 / JV33 / Valuejet

Brand New Printheads for the Mimaki JV5 and JV33 and Mutoh Valuejet. OEM printheads with the green connectors

Please note that this head does not come with the Mimaki Head Memory Board as shown in the picture. You will need to remove the one off of your old head and move it to this one. We have heads with the memory board available for $2200 - please inquire.

7 Day Return Policy: You may return unopened printhead packages within 7 days of receiving the package - for a restocking fee of 20%. Returns must be postmarked within 7 days of receiving package. Any opened packages are not eligible for return.

Print heads are intended for installation by factory (Roland, Mimaki or Mutoh) trained and authorized technicians.

Due to the nature of these consumable items and possibility of improper installation, all opened parts sold are non-returnable and final sale. The exception is when a factory authorized technician has personally opened and installed the print head, we allow a 7 day return (with 20% restocking charge). We will require a formal letter from the factory authorized technician to detail their installation procedure. Any damage caused by improper installation will will not be eligible for return.

INVENTORY IN STOCK - 0

Out of Stock - Please email to place an order for this

$1899.00


Epson DX5 printhead for Mimaki JV33 & Mutoh Valuejet

Brand New Printheads for Mimaki JV33 and Mutoh Valuejet (1204, 1604) printers. These are Epson heads made BEFORE they changed over the parts that prevent them from being used in these printers. Be wary about those that advertise new 2013 heads as these have the protection that prevent the heads from being used in JV33's.

Unlike OEM heads with a black nozzle plate, they have a gold teflon anti-clog coating to minimize nozzle clogging for longer head life. You must transfer and use your old manifold (held in by 3 screws) to this printhead in order for it to fit in the printhead socket. For the JV33, you must be using 1.x or 2.x firmware. We have available firmware that you can downgrade your printer to. Note: Do not purchase these for a JV5 as this printer uses a different variant of the printhead.

7 Day Return Policy: You may return unopened printhead packages within 7 days of receiving the package - for a restocking fee of 15%. Returns must be postmarked within 7 days of receiving package. Any opened packages are not eligible for return.

Print heads are intended for installation by factory (Mimaki or Mutoh) trained and authorized technicians.

Due to the nature of these consumable items and possibility of improper installation, all opened parts sold are non-returnable and final sale. The exception is when a factory authorized technician has personally opened and installed the print head, we allow a 7 day return (with 20% restocking charge). We will require a formal letter from the factory authorized technician to detail their installation procedure. Any damage caused by improper installation will will not be eligible for return.

INVENTORY IN STOCK - 0

Available by special order only - please inquire

$1599.00


Damper - for JV33, JV5

Dampers for Mimaki JV33 and JV5 printers. These are solvent resistant. Dirty dampers impede the flow of ink and you'll get frequent drop-outs, missing jets and ink starvation. Eventually, neglected dampers will damage to the printhead because of overheated jets.

INVENTORY IN STOCK - -18

Currently backordered. more coming in next week. Preorder now

Quantity Discounts
QuantityPrice
1+$12.00
4+$10.00
12+$7.50


Cap Top for Mimaki JV33, JV5, Mutoh Valuejet (DX5)

Solvent Resistant Cap Top for Mimaki JV33, JV5, and Mutoh Valuejet printers. These devices serve 2 purposes - to prevent the printhead from drying out when parked and to assist in priming/sucking out ink from the head. If the rubber around your cap top is bent, brittle or dirty, you will lose suction when the pump is operating - thereby not cleaning your printhead properly. The result is misfiring and printhead clogging. Inspect your Cap Tops often and replace as necessary.

INVENTORY IN STOCK - 3



$45.00


Capping Station for Mimaki JV33

Entire capping station for Mimaki JV33

INVENTORY IN STOCK - 0

Backorder now. Additional stock in 1 week.

$119.00


JV5/JV33/Valuejet Printhead Cable - 36cm (14in)

These Printhead cables are double layered and compatible with Mimaki JV33, JV5, and Mutoh Valuejet printers. They are 36cm (14") in length. When head cables get dirty, bent or stripped, you'll get printheads that will misfire or stop working altogether - and then you'll have one expensive repair. You hear this all the time - cables that short out the printhead or worse, cause damage to the expensive Head Board or Carriage Board. Official Mimaki documents say that the life of cables is between 5-10 insert/removal cycles. We know that you can get more life if you are careful in handling these but the fact is that the delicate foil leads get damaged over time from each removal cycle. If you notice ANY damage (bent connector, dirty leads, even the slightest nick to the cable), change out the cable immediately. It's much cheaper to replace cables than to deal with a broken head board or printhead!

INVENTORY IN STOCK - 6



$21.00


DX5 Wiper

Solvent Resistant Wipers for DX5 printheads - for Mimaki JV33, JV5, Mutoh 1204, 1604, 1614 printers. When your wipers are dirty or slightly deformed, it's time to replace them. Waste Ink and paper dust accumulate on the wipers. If you don't inspect and change them often, you'll get clogged printheads as well as gunk randomly depositing onto your prints. These are low cost items and easy to change. It would be foolish not to perform this needed maintenance at regular intervals. We recommend changing them every 6-12 months

INVENTORY IN STOCK - -1

Currently backordered. Allow up to 1 week for wipers to be fulfilled.

$4.00


Encoder Sensor for Mimaki JV33

Encoder Sensor for Mimaki JV33 Printers

INVENTORY IN STOCK - 2



$79.00


Bulk Ink System for Mimaki JV33 printers

Untitled Document

Save big bucks by using third party solutions such as Triangle, Lyson or other inks. Never have to worry again about running out of ink during a long unattended run. Add ink anytime you want - even when the printer is running.

This bulk ink system for your JV33 is a perfect accessory to help you control your costs as well as allowing to you see how much ink you have any any given time. Available in many different configurations, you can utilize most inksets available to your printer. The most common set is either the 4 color SS21 set for the JV3 or 4 color HS1 set for the JV5. We can also get for you a system that would allow you to use the ES3 ecosolvent inks, Aqueous Pigment inks, or Dye Sub inks.

This particular system address 4 colors with 8 carts (2 each CMYK). If you are using a 6 color SS21 or ES3 system, please ask and we can get this for you.

The cartridges have permanent chips. All you have to do is press the button on the cartridge to reset the ink level to full and to reset the date. Each 220ml cartridge is hooked up to an extra large 1.5 liter (1500ml) tank. Refill the tank at anytime.

INVENTORY IN STOCK - 2



$799.00


Mutoh Valuejet 1604/1204 Bulk Ink System

Untitled Document

Save big bucks by using third party solutions such as Triangle, Lyson or other inks. Never have to worry again about running out of ink during a long unattended run. Add ink anytime you want - even when the printer is running.

This bulk ink system for your Mutoh Valuejet 1604 and 1204 is a perfect accessory to help you control your costs as well as allowing to you see how much ink you have any any given time. This system utilizes a Smart Card system - just like what your present cartridge uses. You can purchase additional cards at $5 each or a Smart card writer to make your own cards. Each card allows the printer to use 440ml of ink before you have to put in a new one.

The system utilizes 220ml cartridges and is hooked up to an extra large 1.5 liter (1500ml) tank. Refill the tank at anytime.

If you have a Valuejet 1614 machine, we can get the vertical hanging cartridges for special order at the same price.

INVENTORY IN STOCK - 0

 0     
Out of Stock
This is a special order item which can be delivered within 1 week

$475.00

Due to the nature of these consumable items, all parts sold are non-returnable and final sale