Mac Media USA, Inc.
cart.cgi Shopping Cart


Roland Versacamm (Main Board) Repair services

Untitled Document

**WHEN SENDING THE BOARD IN - PLEASE DOWNLOAD THIS FORM AND INCLUDE WITH SHIPMENT****

At checkout, the method of shipping you select is how we return the board to you.

If you have or suspect a damaged Main board on your Versacamm printer, we do circuit board repair In-house! Forget about spending $1200+ for a new board. We MAY be able to repair your board and get you back running again quickly for significantly less. Board repairs are warranted for 30 days. Any additional rework (up to 2 times) there is no charge except for shipping. This is to allow you to determine if something else (i.e. bad head, cabling other parts) are causing the short. Note: for boards with USB or Ethernet issues, you MUST contact us first to discuss options as these are not not normal repairs AND THERE IS NO GUARANTEE for USB/Ethernet problems will be corrected.

Symptoms: 1-2 colors are completely not printing. For example for SP models, if you are missing both Cyan and Black, or Yellow and Magenta or VP models (missing 1 or more colors)- it MAY be a sign of a board that may need repair. If the printer does not turn on, this may be an issue we can work on. Any other issues including non-working USB, networking or continuous ink spraying - these are non standard repairs and will take longer to address (or even not able to repair) - please email us FIRST to discuss about these types of issues

We diagnose boards prior to repair. If board does NOT need repair, we refund charges paid - minus return shipping charge. No charge for the diagnosis. If we determine that a board has been damaged beyond repair, we charge ONLY for return shipping (no bench charge). If refunding international payments, please note that the exchange rate changes often and what you receive back may be different from original payment. NOTE that when we repair your boards your firmware and parameters WILL NOT be affected at all - as long as you don't remove your battery.

If there is damage to the solder pads caused by prior repair, there may be an additional charge to repair pads or solder holes. We will inform you if we have to perform this type of repair and the additional costs. Also, if there has been prior repair done to the board (not by us), our services are not be guaranteed (though we will try our best to rectify the situation) because there are lots of unknowns that we don't have control over. You must consider this point before sending us the board for repair if there has been a prior repair not done by us.

AFTER your order is placed, please carefully pack your appropriate board (Pro II machines - Head Board) or (Versacamm - Main Board). It is recommended that you use Anti-static bagging and packing material to protect the board. No need to go crazy in packing and large boxes though. Roland ships their new replacement boards in a 12" x 9" x 4" box with some bubble wrap and you can do the same. Send the board to us insured to: Mac Media USA, Inc., 5 North Hudson St.• Chester, NY 10918 USA
We will not be responsible for items damaged from insufficient packing or lost items in transit.
BE SURE TO MARK ON THE OUTSIDE BOX - "BOARD FOR REPAIR SERVICES" - so that it gets routed to the right department and in the case of international shipments, we can avoid duty charges.

Repairs generally take between 1-3 days after receipt of board - unless the shipping schedule on our entry page indicates otherwise. Any non standard repairs will take longer so please keep that in consideration

INVENTORY IN STOCK - 64



$199.00


Roland Soljet (HEAD BOARD) Repair services

Untitled Document

**WHEN SENDING THE BOARD IN - PLEASE DOWNLOAD THIS FORM AND INCLUDE WITH SHIPMENT****

At checkout, the method of shipping you select is how we return the board to you.

If you have or suspect a damaged Head Board for your Soljet, Cammjet or Hifi Jet, we do circuit board repair In-house! Forget about spending $1500+ for a new board. We may be able to repair your board and get you back running again quickly for significantly less. Any additional rework (up to 2 times) there is no charge except for shipping. This is to allow you to determine if something else (i.e. bad head, cabling other parts) are causing the short.

Symptoms we repair : 1+ colors are completely not printing and you have ruled out a bad printhead - it would be a sign of a board that may need repair. If the printer does not turn on, we may be able to work on this issue too. Any other symptom, please let us know first to see if we can work on it.

We diagnose boards prior to repair. If board does NOT need repair, we refund charges paid - minus return shipping charge. No charge for diagnosis. If we determine that a board has been damaged beyond repair, we charge ONLY for return shipping.. If refunding international payments, please note that the exchange rate changes often and what you receive back may be different from original payment.

If there is damage to the solder pads caused by prior repair, there may be an additional charge to repair pads or solder holes. We will inform you if we have to perform this type of repair and the additional costs. Also, if there has been prior repair done to the board (not by us), our services are not be guaranteed (though we will try our best to rectify the situation) because there are lots of unknowns that we don't have control over. You must consider this point before sending us the board for repair if there has been a prior repair not done by us.

AFTER your order is placed, please carefully pack your HEAD board (Not Main board) . Be sure to use Anti-static bagging and packing material to protect the board if possible. Send the board to us insured to: Mac Media USA, Inc., 5 North Hudson St.• Chester, NY 10918 USA
We will not be responsible for items damaged from insufficient packing or lost items in transit.
BE SURE TO MARK ON THE OUTSIDE BOX - "BOARD FOR REPAIR SERVICES" - so that it gets routed to the right department and in the case of international shipments, we can avoid duty charges.

Repairs generally take between 1-3 days after receipt of board - unless the shipping schedule on our entry page indicates otherwise. Any non standard repairs will take longer so please keep that in consideration

INVENTORY IN STOCK - 63



$199.00


JV3 & JV4 Slider Board Repair services

Untitled Document

**WHEN SENDING THE BOARD IN - PLEASE DOWNLOAD THIS FORM AND INCLUDE WITH SHIPMENT****

At checkout, the method of shipping you select is how we return the board to you.

If you have or suspect a damaged slider board for your JV3 or JV4 printer, we do circuit board repair In-house! Forget about spending $600 for a new board. We may be able to repair your board and get you back running again quickly for significantly less. Any additional rework (up to 2 times) there is no charge except for shipping. This is to allow you to determine if something else (i.e. bad head, cabling other parts) are causing the short.

Symptoms: a printhead not printing AT ALL - even after replacing the head. Note - a bad HDC/Main board will also show the same symptoms. We HIGHLY recommend you sending both boards to us - but if you do that, you should select the JV3 and JV4 Main/HDC Board Repair services item instead so the correct shipping charge is made.

NOTE: Picture shows a slider board from a JV3s. If you have a JV3sp or JV4 printer, this board will look slightly different.

We diagnose boards prior to repair. If board does NOT need repair, we refund charges paid - minus return shipping charge. There is no charge for the diagnosis. If we determine that a board has been damaged beyond repair, we charge ONLY for return shipping (no bench charge). If refunding international payments, please note that the exchange rate changes often and what you receive back may be different from original payment.

If there is damage to the solder pads caused by prior repair, there may be an additional charge to repair pads or solder holes. We will inform you if we have to perform this type of repair and the additional costs.

AFTER your order is placed, please carefully pack your appropriate board. Be sure to use Anti-static bagging and packing material to protect the board. Send the board to us insured to: Mac Media USA, Inc., 5 North Hudson St., Chester, NY 10918 USA
We will not be responsible for items damaged from insufficient packing or lost items in transit.
BE SURE TO MARK ON THE OUTSIDE BOX - "BOARD FOR REPAIR SERVICES" - so that it gets routed to the right department and in the case of international shipments, we can avoid duty charges.

Repairs generally take between 1-3 days after receipt of board - unless the shipping schedule on our entry page indicates otherwise

INVENTORY IN STOCK - 178



$125.00


JV3 and JV4 Main/HDC Board Repair services

Untitled Document

**WHEN SENDING THE BOARD IN - PLEASE DOWNLOAD THIS FORM AND INCLUDE WITH SHIPMENT****

At checkout, the method of shipping you select is how we return the board to you.

If you have or suspect a damaged Main or HDC for your JV3 or JV4 printer, we do circuit board repair In-house! A new board may run you $1400 or more! We may be able to repair your board and get you back running again quickly for significantly less. Any additional rework (up to 2 times) there is no charge except for shipping. This is to allow you to determine if something else (i.e. bad head, cabling other parts) are causing the short.

Symptoms we repair: The machine does not turn on but you still have the green light on. Another symptom - 1 or more colors are COMPLETELY not printing and you have ruled out other potential issues such as: Bad print head, malfunctioning pump and cap top assemblies, Bad Linear Encoder board. Note: many times, a bad main board symptoms may be caused by a bad slider board. You may want to send both to us to verify. If you have any other symptom, please email us to see if it is a problem we work on.

We diagnose boards prior to repair. If board does NOT need repair, we refund charges paid - minus return shipping charge + a $40 bench charge. If we determine that a board has been damaged beyond repair, we charge ONLY for return shipping (no bench charge). If refunding international payments, please note that the exchange rate changes often and what you receive back may be different from original payment.

If there is damage to the solder pads caused by prior repair, there may be an additional charge to repair pads or solder holes. We will inform you if we have to perform this type of repair and the additional costs.

AFTER your order is placed, please carefully pack your appropriate board. PLEASE INCLUDE YOUR SLIDER BOARD TOO as there may be issues with this and we can diagnose both at once. Be sure to use Anti-static bagging and packing material to protect the board. Send the board to us insured to: Mac Media USA, Inc., 5 North Hudson •Chester, NY 10918 USA
We will not be responsible for items damaged from insufficient packing or lost items in transit.
BE SURE TO MARK ON THE OUTSIDE BOX - "BOARD FOR REPAIR SERVICES" - so that it gets routed to the right department and in the case of international shipments, we can avoid duty charges.

Repairs generally take between 1-3 days after receipt of board - unless the shipping schedule on our entry page indicates otherwise. Any non standard repairs will take longer so please keep that in consideration

INVENTORY IN STOCK - 67



$199.00


Mimaki Firewire 1394 board Repair Services

Untitled Document

**WHEN SENDING THE BOARD IN - PLEASE DOWNLOAD THIS FORM AND INCLUDE WITH SHIPMENT****

At checkout, the method of shipping you select is how we return the board to you.

**NOTE: The firewire repair requires extra time to repair (2-3 weeks). Advance exchange of board is available at an extra charge if you are in a rush - please email for info**

If you have a problem of the computer not being able to see your JV3 or JV4 printer and you have replaced the firewire card in your computer, we do circuit board repair In-house! A new board may run you $1800 or more! Issues are usually caused by a power surge to the computer and going right down to the 1394 board.

The firewire board is extremely susceptible to any large voltage swings because the firewire coming from the computer carries voltage. We carry a special adapter that prevents this from occuring as it filters the voltage from the boards. That's why we now include this adapter free of charge with all repairs so this can be prevented in the future (inquire if you are interested in this separately).

Note, the 1394 board in your printer is pretty finicky on the type of firewire card in your computer. You will have a lot less problems if you have a firewire card utilizing a Texas Instruments chipset. If you have been printing all along and all of a sudden it stops recognizing the printer, you should try replacing the card FIRST or connecting a firewire hard drive to rule out a faulty computer card.

If there is damage to the solder pads caused by prior repair, there may be an additional charge to repair pads or solder holes. We will inform you if we have to perform this type of repair and the additional costs.

AFTER your order is placed, please carefully pack your appropriate board. PLEASE INCLUDE YOUR SLIDER BOARD TOO as there may be issues with this and we can diagnose both at once. Be sure to use Anti-static bagging and packing material to protect the board. Send the board to us insured to:
Mac Media USA, Inc.,
5 North Hudson St.
Chester, NY 10918 USA
We will not be responsible for items damaged from insufficient packing or lost items in transit.
BE SURE TO MARK ON THE OUTSIDE BOX - "BOARD FOR REPAIR SERVICES" - so that it gets routed to the right department and in the case of international shipments, we can avoid duty charges.

Firewire repairs are the most difficult of the board repairs for the JV3. So be prepared for a possible longer repair - allow anywhere from 2-3 weeks for this to be done. In the meantime, you can always use the Parallel port while the board is being repaired. We also have 1394 boards available for advance exchanges (for additional cost). Please inquire about availability.

INVENTORY IN STOCK - 78



$249.00


JV33 / CJV30 Main Board Repair services

Untitled Document

**WHEN SENDING THE BOARD IN - PLEASE DOWNLOAD THIS FORM AND INCLUDE WITH SHIPMENT****

At checkout, the method of shipping you select is how we return the board to you.

If you have or suspect a damaged Main board for your JV33 or CJV30 printer, we do circuit board repair In-house! A new board may run you $2400 or more! We may be able to repair your board and get you back running again quickly for significantly less. Any additional rework (up to 2 times) there is no charge except for shipping. This is to allow you to determine if something else (i.e. bad head, cabling other parts) are causing the short.

Symptoms: Machine is not turning on, 1 or more colors are COMPLETELY not printing and you have ruled out other potential issues such as: Bad print head, malfunctioning pump and cap top assemblies, Bad Linear Encoder board.

We also replace the connectors for the flat ribbon cables. Did you pull too hard and break the connector? We can replace them on either the main board or slider board

We diagnose boards prior to repair. If board does NOT need repair, there is no charge for the inspection other than return shipping charges. If we determine that a board has been damaged beyond repair, we charge ONLY for return shipping. If refunding international payments, please note that the exchange rate changes often and what you receive back may be different from original payment.

If there is damage to the solder pads caused by prior repair, there may be an additional charge to repair pads or solder holes. We will inform you if we have to perform this type of repair and the additional costs.

AFTER your order is placed, please carefully pack your appropriate board. DO NOT SEND IN YOUR SLIDER BOARD OR THE SMALL REGENERATIVE RESISTIVE BOARD (the 1" square board that is on the main board) WE ARE NOT RESPONSIBLE FOR THESE IF THEY GET LOST OR BROKEN IN TRANSIT. We do not check these boards anyway. Be sure to use Anti-static bagging and packing material to protect the
We will not be responsible for items damaged from insufficient packing or lost items in transit.
BE SURE TO MARK ON THE OUTSIDE BOX - "BOARD FOR REPAIR SERVICES" - so that it gets routed to the right department and in the case of international shipments, we can avoid duty charges.

Repairs generally take between 2-5 days after receipt of board - unless the shipping schedule on our entry page indicates otherwise

INVENTORY IN STOCK - 50



$199.00


JV3/JV4 Main Board Return Shipping charge

Untitled Document

At checkout, the method of shipping you select is how we return the board to you.

If we determine that your boards are good and will not require repair, add this item to your cart to allow us to figure out return shipping charges.

This is for the return of a Main board and if required, the slider/1394 board that you may have sent to us.

 

INVENTORY IN STOCK - 99



$1.00

Due to the nature of these consumable items, all parts sold are non-returnable and final sale